Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
Sale!
View larger
View larger
GMW16857
New product
GMW16857 2nd Edition, November 1, 2017 Hydrographics for Exterior Applications
More info
Description / Abstract:
Material Description.
The Hydrographics (HG) process consists of a water soluble decorative film which deposits an ink pattern onto a plastic part. The ink pattern is a continuous layer covering the entire plastic part. A protective clearcoat must be applied after ink transfer to meet wear resistance, Ultraviolet (UV) stability, and all other performance requirements of this specification. An example of an exterior plastic part with Hydrographic ink system: Molded plastic/baked adhesion promoter/primer/baked basecoat/Hydrographic inks/baked clearcoat.
Hydrographic ink system layering can vary from the preceding example. If the basecoat layer is absent or offers low UV protection, then a UV-stabilized grade of substrate must be used and validated for durability with the production intent finish. Substrates can be various plastic materials.
Symbols. Not applicable.
Applicability.
These Hydrographic printed designs can be used on outside rearview mirror shells, appliques, and other exterior trim parts. This specification covers the initial qualification (technology approval) and performance requirements (finished part) for exterior Hydrographic printing.
The Hydrographics (HG) process consists of a water soluble decorative film which deposits an ink pattern onto a plastic part. The ink pattern is a continuous layer covering the entire plastic part. A protective clearcoat must be applied after ink transfer to meet wear resistance, Ultraviolet (UV) stability, and all other performance requirements of this specification. An example of an exterior plastic part with Hydrographic ink system: Molded plastic/baked adhesion promoter/primer/baked basecoat/Hydrographic inks/baked clearcoat.
Hydrographic ink system layering can vary from the preceding example. If the basecoat layer is absent or offers low UV protection, then a UV-stabilized grade of substrate must be used and validated for durability with the production intent finish. Substrates can be various plastic materials.
Symbols. Not applicable.
Applicability.
These Hydrographic printed designs can be used on outside rearview mirror shells, appliques, and other exterior trim parts. This specification covers the initial qualification (technology approval) and performance requirements (finished part) for exterior Hydrographic printing.