Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
Sale!
View larger
View larger
GMW17479
New product
GMW17479 2nd Edition, May 2018 Thermoplastic Elastomers – Poly(ether-ester) Block Copolymers, Heat Stabilized – Blow Moldable, Boots
More info
Description / Abstract:
Material Description.
This specification covers the properties of blow moldable, black, polyester thermoplastic elastomers. These materials can be processed by blow molding. These resins are not for use in interior applications.
Material types are delineated by Flexural Modulus. The types and corresponding modulus ranges are identified in Appendix A, Table A1. Further delineation is identified by Melt Flow. Type 1 and Type 2 materials are typically used for compact constant velocity joint (CVJ) boots; Type 3 and Type 4 materials are typically used for rack and pinion boots, and propeller shaft boots, and applications where increased stiffness is required.
Symbols.
The material abbreviation according to ISO 18064 is TPC-ET.
Applicability. Typical applications include constant velocity joint (CVJ) boots, rack and pinion boots, and propeller shaft boots.
Remarks. Not applicable
This specification covers the properties of blow moldable, black, polyester thermoplastic elastomers. These materials can be processed by blow molding. These resins are not for use in interior applications.
Material types are delineated by Flexural Modulus. The types and corresponding modulus ranges are identified in Appendix A, Table A1. Further delineation is identified by Melt Flow. Type 1 and Type 2 materials are typically used for compact constant velocity joint (CVJ) boots; Type 3 and Type 4 materials are typically used for rack and pinion boots, and propeller shaft boots, and applications where increased stiffness is required.
Symbols.
The material abbreviation according to ISO 18064 is TPC-ET.
Applicability. Typical applications include constant velocity joint (CVJ) boots, rack and pinion boots, and propeller shaft boots.
Remarks. Not applicable